GMS Instruments Header Containers

Niveau

SIEMENS

SITRANS LVL200 Level Switch

The SIEMENS SITRANS LVL200 is a standard vibrating level switch for use in all liquid and slurry applications such as overflow, high, low, and demand applications, as well as pump protection. For use in SIL-2 applications.

Prijs en bezorgtijd worden verstrekt op aanvraag
Range 40...4000 mm (1.57" to 13 ft)
Process Temperature -196...450 °C (-321 to 842 °F)
Process Pressure -1...160 bar (-14.5 to 2320 psig)
Outputs Relay, NAMUR, transistor, 8/16 mA, contactless
Options SIL 2, hygienic, and marine approvals, Extreme pressures and temperatures options, Remote testing
Key Applications For use in liquids and slurries, for point level measurement, overfill, and dry run protection in chemical, oil and gas, pharmaceutical, food and beverage, and general industries

The SIEMENS SITRANS LVL200 is a standard vibrating level switch for use in all liquid and slurry applications such as overflow, high, low, and demand applications, as well as pump protection. For use in SIL-2 applications.

SITRANS LVL200 level switch is designed for industrial use in all areas of process technology and can be used with liquids and slurries. With a tuning fork insertion length of only 40 mm (1.57“), The SITRANS LVL200 level switch can be mounted in small pipes and applications with confined space. The LVL200 can be used to measure products with a minimum density of >0.5 g/cm³ (0.018 lbs/in³). The LVL200 can be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration.

SITRANS LVL200 continuously monitors faults via frequency evaluation, providing early detection of strong corrosion or damage on the tuning fork, loss of vibration, or a line break to the piezo drive.

The tuning fork is piezoelectrically energised and vibrates at its mechanical resonance frequency of approx. 1200 Hz. The vibration frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated oscillator and converted into a switching command. The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices.

Product Brochure Siemens Point Level Switches SITRANS Point Level

Vraag offerte aan

ONTVANG BINNEN 3 UUR EEN OFFERTE

  • 1. Product verzoek

    • or
  • 2. Jouw gegevens

  • Dit veld is bedoeld voor validatiedoeleinden en moet niet worden gewijzigd.
GMS_Instruments_Package_Delivery

Want more information?

Get in touch with Shirley our SIEMENS specialist

Shirley_Mist-Grey_(A)_Web

Shirley van der Lugt

Sales Representative

GMS-Instruments-Catalogus-01-2021-Cover

Product Catalogus

  • Download onze nieuwste product catalogus
  • Download

Contactgegevens

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands
GMS Instruments Office