GMS Instruments Header Containers

Doorstroming

SIKA

VTR1010...1300 Turbine Flow Sensor

The SIKA VTR1010...1300 turbine flow sensor allows you to determine precisely, dependably and easily the flow rates of different liquids, such as water and other low viscosity liquids, under the most severe conditions.

Prijs en bezorgtijd worden verstrekt op aanvraag
Flow range 0.11...1.1 m³/h to 270...2700 m³/h
Accuracy ±0.5 % of measured value
Reproducibility ±0.05 % of measured value
Mediumtemperature Max. 150°C
Nominal diameter DN 10...DN 300
Process connection Flange: DIN, ANSI, others on request
Pressure drop 280 mbar at 100 % measurement range (density 1, viscosity 1 mm²/s)
Minimum pressure 2 x pressure drop of sensor
Pressure rating Corresponding to flange specification

The SIKA VTR1010…1300 turbine flow sensor allows you to determine precisely, dependably and easily the flow rates of different liquids, such as water and other low viscosity liquids, under the most severe conditions.

The SIKA VTR1010…1300 sensor is particularly robust and, due to the wide range of nominal diameters and five different pick-ups, can cope with even the most severe conditions. The characteristic variable is the K-factor (pulses per litre) which is specific to each measuring unit, is determined by calibration and specified on the nameplate. A five-point calibration report can be supplied on request.

The VTR sensor consists of the measuring turbine and a pick-up mounted on the outside. The liquid flows into the measuring turbine and causes the rotor to move. Due to the characteristic internal diameter, the speed of rotation is directly proportional to the flow rate. The moving rotor blades are detected by the pick-up and this is converted into a pulsed signal proportional to the flow rate.

Vraag offerte aan

ONTVANG BINNEN 3 UUR EEN OFFERTE

  • 1. Product verzoek

    • or
  • 2. Jouw gegevens

  • Dit veld is bedoeld voor validatiedoeleinden en moet niet worden gewijzigd.
GMS_Instruments_Order_Picking

Want more information?

Get in touch with Christiaan our flow expert

Christiaan

Christiaan van Mourik

Project-/ Accountmanager

GMS Instruments Catalog Cover

Product Catalogus

  • Download onze nieuwste product catalogus
  • Download

Contactgegevens

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands
GMS Instruments Office