GMS Instruments Header Containers

Pressure

WIKA

PGT43HP.100 / 43HP.160 Diaphragm Pressure Gauge

At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the WIKA PGT43HP.100 / 43HP.160 intelliGAUGE can be used. Due to the metallic construction of the pressure elements, these instruments have a high overpressure safety in the ranges of 40, 100 and 400 bar.

Price and delivery time will be given on request
Accuracy class 1.6
Scale range NS 100 0...400 mbar, 0...40 bar
Scale range NS 160 0...16 mbar, 0...250 mbar
Process connection with lower measuring flange G ½ B, ½ NPT, ½ NPT female
Medium temperature +100 °C

At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the WIKA PGT43HP.100 / 43HP.160 intelliGAUGE can be used. Due to the metallic construction of the pressure elements, these instruments have a high overpressure safety in the ranges of 40, 100 and 400 bar.

Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The intelliGAUGE PGT43HP fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for mechanical pressure indication can thus be saved.

The WIKA model PGT43HP is based upon a model 432.36 high-quality, stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-3. The rugged design of the diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 … 20 mA, is produced.

The electronic WIKA transmitter, integrated into the high-quality mechanical pressure gauge, combines the advantages of electrical signal transmission with the benefits of a local mechanical display. The measuring span (electrical output signal) is set automatically along with the automatic display, i.e. the scale over the full display range corresponds to 4 … 20 mA. The electrical zero point can also be set manually.

Request an offer

RECEIVE A QUOTE WITHIN 3 HOURS ON BUSINESS DAYS

  • 1. Product request

    • or
  • 2. Your information

  • This field is for validation purposes and should be left unchanged.

GMS_Instruments_Sales_Representative_Website_WIKA_Pressure_Gauge

Want more information?

Get in touch with edward our wika specialist

Edward

Edward van Doorn

Operations Manager

GMS-Instruments-brochure-2024

Product catalog

General contact

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands