GMS Instruments Header Containers

Valves

Clorius Controls

H2FR 2-way Control Valve

The Clorius H2FR 2-way control valve is mainly intended for the control of cooling systems. The H2FR valves are used in conjunction with temperature or pressure differential regulators for controlling industrial processes or cooling systems. As the reverse acting valves are held in a closed position using a built-in spring, the max. differential pressure, ΔpL, against which a valve can close depends on the spring. When opening the valve, the actuator has to overcome the spring force. The table in the datasheet shows max. allowable values of ΔpL as well as the max. allowable inlet pressures for opening the valves, p1max, for various actuator forces.

Price and delivery time will be given on request
Materials Cast Steel GP240GH N (1.0619)
Sizes DN20...DN80
Min. Temperature -40ºC
Max. Temperature 350ºC
Leakage rate ≤ 0.5% of Kvs
Regulating capability Kvs/Kvr > 25

The Clorius H2FR 2-way control valve is mainly intended for the control of cooling systems. The H2FR valves are used in conjunction with temperature or pressure differential regulators for controlling industrial processes or cooling systems. As the reverse acting valves are held in a closed position using a built-in spring, the max. differential pressure, ΔpL, against which a valve can close depends on the spring. When opening the valve, the actuator has to overcome the spring force. The table in the datasheet shows max. allowable values of ΔpL as well as the max. allowable inlet pressures for opening the valves, p1max, for various actuator forces.

Design

The valve components – spindle, seat and cone – are made of stainless steel. The valve body is made of cast steel GP240GH (GS-C25) with flanges drilled according to EN 1092-1. The thread for the actuator connection is G1B ISO 228. The valves are double-seated. The leakage rate is less than 0.5% of the full flow (according to VDI/VDE 2174).

Reverse acting

Without an actuator being connected, the valve is held in a closed position using a spring. With pressure on the spindle, the valve opens. In connection with our actuators, the valves act as “cooling” valves, i.e. they open at rising temperatures. The quadratic characteristic will not cease until the flow has dropped below 4% of the full flow.

Request an offer

RECEIVE A QUOTE WITHIN 3 HOURS ON BUSINESS DAYS

  • 1. Product request

    • or
  • 2. Your information

  • This field is for validation purposes and should be left unchanged.

GMS_Instruments_Package

Want more information?

Get in touch with Bart our Clorius specialist

Bart

Bart de Haan

Managing Director

GMS-Instruments-brochure-2024

Product catalog

General contact

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands