GMS Instruments Header Containers

Flow

SIKA

VMI 10 Magnetic Inductive Flow Sensor

Due to the robust metal housing and stable metal process connections, the SIKA VMI 10 is ideal for use in the field of mechanical engineering and plant construction. Its design also makes it suitable for higher temperatures and process pressures, and the instrument is available in three different sizes. All sensors will be delivered with a works calibration certificate.

Price and delivery time will be given on request
Nominal diameter DN 10
Flow range 1...60 l/min
Process connection G½-ISO 228 male or G¾-ISO 228
Accuracy ±1.5 % of reading ±0.3 % of range
Repeatability 1%
Medium / min. conductivity of medium Water and other conductive liquids / 50 μS/cm
Medium temperature -20...90 °C
Pressure rating PN 16
Frequency output Standard: 500 pulses/l
Analogue output (optional) 4...20 mA 0...10 V
Power supply 24 VDC ±10 %
Electrical connection Plug connector M12 x 1
Degree of protection EN 60529 IP65 and IP67 (with attached cable socket)

Due to the robust metal housing and stable metal process connections, the SIKA VMI 10 is ideal for use in the field of mechanical engineering and plant construction. Its design also makes it suitable for higher temperatures and process pressures, and the instrument is available in three different sizes. All sensors will be delivered with a works calibration certificate.

The smart flow sensors of the SIKA VMI 10 induQ® series operate according to the principle of induction: The measuring pipe is in a magnetic field (B). If an electrically conductive medium, with the flow (Q) to be measured, flows through the measuring pipe and thereby at a right-angle to the magnetic field, a voltage (U) is induced in the medium. This voltage is proportional to the average flow velocity and is picked up by two electrodes.

Regarding flow proportional output signals, two versions are available:

  • Frequency output signal (standard)
  • Analog and frequency output signal (option)

The pulse rate can be configured at the factory.

The induQ® sensors enable the flow measurement/volume flow measurement or dosing of electrically conductive liquids without any moving parts. They are the ideal flow sensors when accuracy and reliability are a must.

Request an offer

RECEIVE A QUOTE WITHIN 3 HOURS ON BUSINESS DAYS

  • 1. Product request

    • or
  • 2. Your information

  • This field is for validation purposes and should be left unchanged.
GMS Instruments IMPA Catalogus SIKA Industrial Thermometer type 297

Want more information?

Get in touch with Christiaan our flow expert

Christiaan

Christiaan van Mourik

Project-/ Accountmanager

GMS Instruments Catalog Cover

Product Catalog

General contact

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands
GMS Instruments Office