GMS Instruments Header Containers

Flow

SIKA

VTH 20 Turbine Flow Sensor

The SIKA VTH 20 turbine flow sensor is made for flow measurement or dosing applications for liquids. Because of the very compact design, the extensive measuring range and the convincing precision of measurements, almost unlimited applications are possible. The sturdy bearing materials - sapphire and tungsten carbide - also guarantee an exceptionally long endurance.

Price and delivery time will be given on request
Material pipe section Brass
Measurement range 1...42 l/min - with continuous operation max. 25 l/min
Accuracy ±1 % of range, ±3 % of reading (from 15 l/min)
Repeatability ±0.2 l/min
Signal output From 0.25 l/min
Medium temperature 0...85°C
Pressure rating PN 16
Nominal diameter DN 20
Process connection G 1 male thread
Sensor Hall effect sensor
Pulse rate / K-factor 232 pulses/l
Electrical connection 2 m PVC cable, shielded (Tmax = 75 °C)
Power supply 10...30 VDC, optional 4.5...26.5 VDC
Degree of protection EN 60529 IP54
Max. particle size in the medium < 0.63 mm

The SIKA VTH 20 turbine flow sensor is made for flow measurement or dosing applications for liquids. Because of the very compact design, the extensive measuring range and the convincing precision of measurements, almost unlimited applications are possible. The sturdy bearing materials – sapphire and tungsten carbide – also guarantee an exceptionally long endurance.

The liquid flowing into the SIKA VTH 20 turbine flow sensor is split into individual jets by the guiding blade. These jets hit the rotor evenly from different directions, setting the rotor in motion. The rotation speed of the rotor is then converted to an electrical pulse signal (frequency): The rotor is fitted with magnets and a Hall effect sensor detects the rotation of the rotor.

A flow-proportional frequency signal (square-wave signal) is made available. The construction of the guiding blade and rotor enables to realize the very low start-up flow values.

Request an offer

RECEIVE A QUOTE WITHIN 3 HOURS ON BUSINESS DAYS

  • 1. Product request

    • or
  • 2. Your information

  • This field is for validation purposes and should be left unchanged.
GMS_Instruments_Packaging_(1)

Want more information?

Get in touch with Christiaan our flow expert

Christiaan

Christiaan van Mourik

Project-/ Accountmanager

GMS Instruments Catalog Cover

Product Catalog

General contact

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands
GMS Instruments Office