GMS Instruments Header Containers

Valves

AMOT

AMOT Elements for model E AMOT valves

AMOT elements are the hearts of the valve. The valve elements regulate the opening and closing of the valve at a set temperature.

Price and delivery time will be given on request
Temperature range 29 ... 114 °C
For valve type E valves
Operating principle Wax expansion
Element types 5435X, 5435P, 9831X, 10912X, 9831P, 10912P
Element construction options Standard, Nickel plated, MO standard, MO nickel plated
Seal material options Buna N/Nitrile, Viton, Neoprene

The AMOT elements are basically the heart of the valve. The valve elements regulate the opening and closing of the valve at a set temperature. A special wax is placed deep in the bottom ‘nut’ of the AMOT element. The expansion of the wax will help slide the element and control the flow. This part is connected with these sidebars that are inside this barrel. The sidebars inside the barrel together make the sliding valve.

The piston is very robust and nearly impossible to pull by hand. All AMOT elements can be calibrated and adjusted at the required set temperature.

The sliding of the element piston will control where the flow is going based on what is happening with the temperature of the medium. The element is closed when the media is “cold” or below the nominal temperature. When the wax gets heated, it will expand and push the sliding valve out, which will cause the AMOT element to open.

How does the element work inside a valve:

  • Crack open
    Element closed below Crack Open Temperature.
  • 50% open position
    Element is 50% open at Control Temperature.
  • Full open
    Element 100% open above Full Open Temperature.

The crack open temperature of AMOT elements for E valves may variate between 29 and 114 degrees celsius. For example, when an element is set at 60°C, it will crack open at 55°C. The maximum temperature is a fascinating setting, and sometimes we forget about it. With extended heat, the wax may start losing its characteristics. In short, above the maximum temperature, the wax inside the valve element is burned. Burning the wax, we lose some physical features that allow expanding at a specific temperature.

Available AMOT elements for E valve:

  • Element type: 5435X, Element construction: Standard, Seal material: Buna N/Nitrile
  • Element type: 5435P, Element construction: Nickel plated, Seal material: Viton
  • Element type: 5435X, Element construction: Standard, Seal material: Viton
  • Element type: 5435P, Element construction: Nickel plated, Seal material: Buna N/Nitrile
  • Element type: 5435X, Element construction: Standard, Seal material: Neoprene
  • Element type: 9831X, Element construction: MO standard, Seal material: Buna N/Nitrile
  • Element type: 10912X, Element construction: MO standard, Seal material: Buna N/Nitrile
  • Element type: 9831P, Element construction: MO nickel plated, Seal material: Viton
  • Element type: 10912P, Element construction: MO nickel plated, Seal material: Viton
  • Element type: 5435P, Element construction: Nickel plated, Seal material: Neoprene
  • Element type: 9831X, Element construction: MO standard, Seal material: Viton
  • Element type: 10912X, Element construction: MO standard, Seal material: Viton
  • Element type: 9831X, Element construction: MO standard, Seal material: Neoprene
  • Element type: 10912X, Element construction: MO standard, Seal material: Neoprene
Datasheet for AMOT E valves and spares Datasheet-AMOT-Model-E-Thermostatic-Control-Valve

Request an offer

RECEIVE A QUOTE WITHIN 3 HOURS ON BUSINESS DAYS

  • 1. Product request

    • or
  • 2. Your information

  • This field is for validation purposes and should be left unchanged.

AMOT-valve-transport-Rotterdam

Would you like to know more?

Contact our AMOT expert Edward! He can help you pick the perfect element for your valve.

Edward

Edward van Doorn

Operations Manager

GMS-Instruments-brochure-2024

Product catalog

General contact

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands