GMS Instruments Header Containers

Valves

Clorius Controls

G1PR / H1PR Pressure Reducing Valve

The Clorius G1PR / H1PR pressure reducing valves are a self-acting unit consisting of a valve, springs, an actuator and one capillary tube connected on the upper side of the actuator. The G1PR / H1PR pressure reducing valves are designed for maintaining the pressure downstream of the valve to an adjusted setpoint value.

Price and delivery time will be given on request
H1PR valve body Cast steel
G1PR valve body Nodular cast iron
Spring W. Nr. 1.4568 powder coated
Diaphragm housing Steel 1.0122
Seating Single-seated
Flow characteristic Quadratic
Leakage rate ≤ 0.05% of Kvs

The Clorius G1PR / H1PR pressure reducing valves are a self-acting unit consisting of a valve, springs, an actuator and one capillary tube connected on the upper side of the actuator. The G1PR / H1PR pressure reducing valves are designed for maintaining the pressure downstream of the valve to an adjusted setpoint value.

Function

The medium flows through the free area between the seat and cone in the direction indicated by the arrow on the body. The position of the valve cone determines the flow rate and consequently the pressure ratio across the valve. The downstream pressure is transmitted through the compensation chamber, and the capillary to the diaphragm converted into a positioning force. This positioning force is adjusting the cone with dependence on the force of the operating springs.

The spring force can be adjusted by using the setpoint adjuster. The valve cone is pressure balanced. The pressure acts onto the bottom and top surface of the cone at the same time. In this way, the forces produced by the media are compensated.

Design

The pressure reducing valve is a self-acting unit consisting of a valve, springs, an actuator and one capillary tube connected on the upper side of the actuator. The valve body is made of nodular cast iron or cast steel. The seat and cone are made of stainless steel. The diaphragm is made of EPDM or NBR rubber, depending on the medium to be controlled.

Request an offer

RECEIVE A QUOTE WITHIN 3 HOURS ON BUSINESS DAYS

  • 1. Product request

    • or
  • 2. Your information

  • This field is for validation purposes and should be left unchanged.

GMS_Instruments_Delivery_Van_Being_Packed

Want more information?

Get in touch with Bart our Clorius specialist

Bart

Bart de Haan

Managing Director

GMS-Instruments-brochure-2024

Product catalog

General contact

Driemanssteeweg 190
3084 CB Rotterdam
The Netherlands
GMS-Instruments-hq